This is a two component polyamine cured phenolic epoxy coating. It is heat resistant to up to 200C and can be applied to hot substrates easily. It can be used as a mid coat, primer or top coating. It comes in transparent, and grey shiny finish which is mostly appropriate for final coat.

Recommended Use :

Suitable for stainless steel, galvanized steel, carbon steel, and aluminium substrates

Features :

* Superior whitness .

* Good hiding power

* Good yellowing resistance .

* Good gloss retention .

* Good durability .

Application Information :

* Thinning & % of Thinner : Afrosolvent ( about ) 10%

* Application tools : Roller , Brush airless spry .

* Dry Film thickness : 30 – 40 u

Used Tools: Brush

Drying Time :

Drying time is generally related to oil circulation, temperature, film thickness and number of coats:

• Surface Dry: 4 hours at 25C and 50%RH

• Dry to Recoat: 10 hours at 25C and 50%RH

Storage :

* 2 years from date production if stored as suggested .

* The product must be kebt in cool well ventilated place , protected from sunlight and heat .

* Containers must be kebt tightly closed after partial usage .

Health and Safety :

please observe the precautionary notice displayed on the container . keep out of reach of children ,Use under well ventilated conditions , Dont breath or inhale mist Avoid skin contact . Spilling the skin con- tact . spillage on the skin shoud immediately be removed with suitable cleaner , soap and water , Eyes shoud be well flushed with water and medical attention to be sough immediatly .

Technical Properties:

* Finish : transparent and gloss.

* Viscosity : 70+=1%

* Density : 1.5g/l

.